Stock iPhone setup
Follow each step, then continue when you are ready.
Change phone or install pathStep 10 of 10
On the phone, then verify in dashboard
10. Broadcast and keep the connection ready
- In FleetDeckConnect, tap Start Broadcast, choose FleetDeck if a picker appears, and confirm Apple’s Start Broadcast.
- Open live view in the dashboard. Verify both the live screen and a tap or swipe.
- Keep Tailscale connected, Wi-Fi on, and the phone awake and unlocked during remote touch.
Refresh apps or recover a connection
- Before the free signing period expires (normally 7 days), disconnect Tailscale, connect LocalDevVPN, and refresh SideStore and both FleetDeck apps. Then disconnect LocalDevVPN and reconnect Tailscale.
- After a restart, unlock the phone, restore VPN, start touch, approve any phone prompt, then restart the broadcast.
- To stop sharing, use the phone’s Screen Broadcast control and choose Stop. Start again from FleetDeckConnect.
- If FleetDeck is missing from the broadcast picker, check the Connect installation and its broadcast extension. Reinstall with extensions retained if needed.
- If pairing fails after an update or reset, rerun Bootstrapper over USB with the current device access key.
All steps
- 1. Prepare your iPhone
- 2. Prepare your computer and device key
- 3. Pair over USB with Bootstrapper
- 4. Enable Developer Mode
- 5. Install SideStore with iLoader
- 6. Install both FleetDeck apps
- 7. Pair FleetDeckConnect
- 8. Switch to Tailscale
- 9. Start touch and approve on the phone
- 10. Broadcast and keep the connection ready